GSQ-Z Series 2-Way Bistable Magnetic Holding Solenoid Valve

GSQ-Z Series 2-Way Bistable Magnetic Holding Solenoid Valve

Bistable Magnetic Holding Solenoid Valve Operation principles (subject to permanent magnets) require only a short pulse of electricity to open(close) and will stay open(close) even if no electrical power is applied.

Function

GSQ-Z Series 2-Way Bistable Magnetic Holding Solenoid Valve

It is widely used for automatic control of various pipelines, such as agricultural automatic irrigation, landscaping and automatic irrigation, using liquid, gas and light oil as media.


Product Information
The Miniature Bistable Magnetic Holding Solenoid Valve was designed with size and battery life in mind.Powered metal was used to reduce the footprint of the valve while allowing for integrated mounting features.A diaphragm was used to isolate the fluid from contact with metal.A permanent magnet is used to latch the vlave in the open or closed position to reduce the draw on the battery while dispensing.pins were also integrated into the design to detect when fluid was no longer present and signal the end user when is was time to re-fill the supply fluid.All of this in a package roughly the size of a thumb tack.


Working medium:liquid、water、air、light oil(viscosity≤20cst)
Medium temperature:-5 ~ 80℃
Working pressure:0.3~16bar (details see specification table)
Working type:DN15~50 pilot operated
Valvebody material: Brass /SS316
Sealing material:NBR(-5~80℃)
Interface:G thread / NPT thread                          
Working voltage:DC6V   DC12V  DC24V  
4W  6W  12W   IP65  H degree                     
Options:sealing material:EPDM(-20~139℃)  VITON(-20~169℃)


Operation principles   (subject to permanent magnets)

The solenoid valves require only a short pulse of electricity to open and will stay open even if no electrical power is applied. To close the latching solenoid valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) and the latching solenoid valve will close and stay closed. To open the solenoid valve again swap the live and neytral wires back to original position and repeat the process.


06.jpg

GSQ-Z  Series Specification Table

TIM截图20180707113748.jpg


Hot Tags: Bistable Magnetic Holding Solenoid Valve, China, manufacturers, suppliers, factory, wholesale, customized
Related Products
Contact Us
Gauss Industrial Co.,Ltd

Address: Room 1907, 19/F, Lee Garden One, 33 Hysan Avenue, Causeway Bay, Hong Kong

Tel:

Fax:

E-mail: business@i-gauss.com

Copyright © Gauss Industrial Co.,Ltd All Rights Reserved.
foottop